FUZRR Double Clamp Digital Phase Voltammeter FR2010+

Function

Measure two AC voltages, currents, phase between voltages, phase between currents, phases between voltages and currents, frequencies, determine transformer wiring groups, inductive, capacitive circuits, test secondary loops and busbar protection systems, read out the phase relationship between the CTs of the differential protection groups, check the wiring of the power meter, check the line equipment, etc.

Power

Built-in large capacity lithium battery 3.7V

Power consumption

Turn on the backlight and consume up to 50mA. The battery can work continuously for more than 48 hours.

Display mode

LCD display，71*52mm

Instrument size

L/W/T：187*191*51mm

Jaw size

Φ8mm

Voltage range

AC 0.00V～600V

Current range

AC 0.0mA～20.0A

Phase range

0.0°～360.0°

Frequency range

45.00Hz～65.00Hz

Resolution

Voltage：AC 0.01V
Current：AC 0.1mA
Phase：0.1°
Frequency：0.01Hz

Detection rate

About 2 seconds/time

Data hold

Press HOLD key to hold data during test, “DH” symbol display

Automatic shut-down

About 15 minutes after power on, the meter will automatically shut down to reduce battery consumption

Backlight function

Suitable for dim places and night use

Voltage detection

Four grids of power are displayed, and the remaining one should be charged in time

Instrument weight

Hose：473g
Tip-shaped current clamp：180g×2

Test line length

1.5m

Line length of the current clamp

2m

Working temperature and humidity

-10℃～40℃；below 80%Rh

Storage temperature and humidity

-10℃～60℃；below 70%Rh

input impedance

Test voltage input impedance is：1MΩ

Pressure resistance

The withstand voltage of 1000V/50Hz sine wave AC voltage between the instrument circuit and the housing lasts 1 minute

insulation

Between instrument line and housing≥100MΩ

structure

Double insulation

Suitable for safety regulations

IEC61010-1 CAT Ⅲ 600V，IEC61010-031，IEC61326，Pollution level 2