In stock
7 days
Weight: 1.000 Kg.
6311118
Brand: BISON
Very high final bond strength Easy to apply Filling Particularly for interiors Solvent-free Permanently elastic Universally applicable Suitable for uneven surfaces Correctable Moisture resistant Temperature resistant
Brand: BISON
In stock
7 days
WCWSP002
• Used for interior and exterior waterproofing of cement supports and masonry against humidity and cellar waters, against stagnant waters etc. • It can be used above or below grade, to waterproof cisterns, tunnels, reservoirs, basements, retaining walls. • Waterproofing positive pressure like swimming pools purification plants plinths, dams etc. • Waterproofing negative pressure like galleries, humid rooms, elevator shafts etc. Appearance Fine grey powder Water Absorption 3.6% water (boiling)  submersion at 24 hours Color Reddish Brown (after apply)...
In stock
7 days
WCWSP001
• Used for interior and exterior waterproofing of cement supports and masonry against humidity and cellar waters, against stagnant waters etc. • It can be used above or below grade, to waterproof cisterns, tunnels, reservoirs, basements, retaining walls. • Waterproofing positive pressure like swimming pools purification plants plinths, dams etc. • Waterproofing negative pressure like galleries, humid rooms, elevator shafts etc. Appearance Fine grey powder Water Absorption 3.6% water (boiling)  submersion at 24 hours Color Reddish Brown (after apply)...
In stock
7 days
Weight: 1.000 Kg.
1492345
Brand: BISON
Powerful effect Quick-drying
Brand: BISON
In stock
7 days
WCMF001
Mega flex is used for: Non-exposed applications, covered, tiled or topped including: • Foundations. • Basements. • Retaining walls. • Roofs slabs. • Balconies and terraces. • Decks and patios. • Wet areas such as bathrooms, kitchens toilets, As a protective coat; • On shear walls and all types of concrete surfaces in contact with soil against moisture. g time Form liquid Appearance/Color dark brownish to black (when dry Chemical Base Rubberized Bitumen Emulsion Unit weight 1.05 ± 0.01kg/lt (@ 20° C Flash point...
In stock
7 days
Weight: 1.000 Kg.
6300577 TIN 650 ML
Brand: BISON
Bonds immediately Super-strong Suitable for materials under stress Universal Liquid Moisture and frost resistant Simple to use Resistant to temperatures between -40 °C and +70 °C
Brand: BISON
In stock
7 days
WCMP001
Mega prime is used for: • Tanking and waterproofing of substructures to provide an impervious membrane in wet areas • Damp proof membrane for roof • Floor slabs • Basements, retaining walls • Landscape deck • Curing membrane Chemical base Bitumen Emulsion Density (at 23˚C) 1.00kg/lt Flash Point Non-flammable Solid Content Approximately 26 % by Curing Time Touch dry after Approx 2 hours Over coatable after Approx. 8 hours Fully cured after Approx. 72 hours Consumptions On Concrete...
In stock
7 days
WCWL002
Mega water Loc is a dry powder that when mixed with water to a creamy consistency can be applied as a brush on slurry to concrete as a penetrating surface treatment. Supply Form Powder Color Gray Bulk Density 2.0Kg Application Temp >5c Setting Time 2-4 hours Bonding Strength 1.25 Mpa Packing 5 kg Coverage 36-40 sft
In stock
7 days
WCWS001
Do not work with MEGA WATER SEAL Two component acrylic cementitious coating when substrate temperatures are below +5°C and above +40°C, or in conditions where heat or wind may have a strong effect. • Substrates treated with water-repellent waterproofing agents or evaporation protec tion must be pretreated. • Only mix a quantity of MEGA WATER SEAL Two component acrylic cementitious coating that can be used within an hour. • On large areas apply the slurry in sections. Any further work must be carried out wet on wet. • The bonding agent must be applied to cover the whole area completely,...
In stock
7 days
WCMF002
Mega flex is used for: Non-exposed applications, covered, tiled or topped including: • Foundations. • Basements. • Retaining walls. • Roofs slabs. • Balconies and terraces. • Decks and patios. • Wet areas such as bathrooms, kitchens toilets, As a protective coat; • On shear walls and all types of concrete surfaces in contact with soil against moisture. g time Form liquid Appearance/Color dark brownish to black (when dry Chemical Base Rubberized Bitumen Emulsion Unit weight 1.05 ± 0.01kg/lt (@ 20° C Flash point...
In stock
7 days
Weight: 1.000 Kg.
6312093 425 G WHITE
Brand: BISON
Super-fast building of final bonding strength Very high final bond strength Permanently elastic Can be used internally and externally Paintable (test first) Good filling capacity Resistant to temperatures between -40 °C and +100 °C UV, water and all-weatherresistant 100 % adhesive (non-shrinking) Also bonds to slightly damp surfaces Solvent-free Excellent bonding without primer Acid-free, odourless
Brand: BISON
In stock
7 days
WCAM001
✓ The special coaty system gives outstanding water and dirt resistance. ✓ Excellent UV protection and moisture control. ✓ Rapid Drying - fast recoating time and labour saving. ✓ Outstanding exterior durability flexibility and adhesion. ✓ Lock porosity of the substrate and create anti-porus surface to prevent moisture penetration. ✓ Can be used on EIFS, XPS & EPS system.     Appearance Mid-sheen Colour White, Beige, Light Green, Light Pink Light Purple, Light Blue, Light orange and as per customization. Binder Polyurethane Density at 23°C...
In stock
7 days
WCWL001
Mega water Loc is a dry powder that when mixed with water to a creamy consistency can be applied as a brush on slurry to concrete as a penetrating surface treatment. Supply Form Powder Color Gray Bulk Density 2.0Kg Application Temp >5c Setting Time 2-4 hours Bonding Strength 1.25 Mpa Packing 25 kg Coverage 180-200 sft
In stock
7 days
WCWS002
Do not work with MEGA WATER SEAL Two component acrylic cementitious coating when substrate temperatures are below +5°C and above +40°C, or in conditions where heat or wind may have a strong effect. • Substrates treated with water-repellent waterproofing agents or evaporation protec tion must be pretreated. • Only mix a quantity of MEGA WATER SEAL Two component acrylic cementitious coating that can be used within an hour. • On large areas apply the slurry in sections. Any further work must be carried out wet on wet. • The bonding agent must be applied to cover the whole area completely,...
In stock
7 days
WCMG001
Excellent initial flow and flow retention. High early and ultimate strength facilitates rapid installation and durability of the hardened grout respectively. Dual expansion in plastic and hardened phases. Impermeable and resistant to oil and water. Suitable for pumping or pouring over a large range of application consistencies and temperatures. Suitable for grouting and anchoring of UPVC pipes service penetration. USES Used for free flow precision grouting, bedding and void filling applications. Used in a wide range of heavy duty applications such as Bridge bearings foundation, Crane...
In stock
7 days
MPAF002
Excellent initial flow and flow retention. High early and ultimate strength facilitates rapid installation and durability of the hardened grout respectively. Dual expansion in plastic and hardened phases. Impermeable and resistant to oil and water. Suitable for pumping or pouring over a large range of application consistencies and temperatures. Suitable for grouting and anchoring of UPVC pipes service penetration. USES Used for free flow precision grouting, bedding and void filling applications. Used in a wide range of heavy duty applications such as Bridge bearings...
In stock
7 days
WCMP002
Mega prime is used for: • Tanking and waterproofing of substructures to provide an impervious membrane in wet areas • Damp proof membrane for roof • Floor slabs • Basements, retaining walls • Landscape deck • Curing membrane Chemical base Bitumen Emulsion Density (at 23˚C) 1.00kg/lt Flash Point Non-flammable Solid Content Approximately 26 % by Curing Time Touch dry after Approx 2 hours Over coatable after Approx. 8 hours Fully cured after Approx. 72 hours Consumptions On Concrete...
In stock
7 days
WCMG001
Excellent initial flow and flow retention. High early and ultimate strength facilitates rapid installation and durability of the hardened grout respectively. Dual expansion in plastic and hardened phases. Impermeable and resistant to oil and water. Suitable for pumping or pouring over a large range of application consistencies and temperatures. Suitable for grouting and anchoring of UPVC pipes service penetration. USES Used for free flow precision grouting, bedding and void filling applications. Used in a wide range of heavy duty applications such as Bridge bearings foundation, Crane...
In stock
7 days
WCMSB001
MEGA SHEILD is a protective and decorative heat proof coating, which is specially formulated for brushable application over any surfaces to resist and reflect ultraviolet (Sunrays) to insulate any structure. MEGA SHEILD is designed as a high economical solution which easy to apply at any surface. Form Liquid Appearance/Color Appearance/Color Chemical base Approximately 70% ± 10% Initial setting 3-5 hours Final curing time 1-3 days (depending on ambient temperature/thickness Packing  20kg bucket Coverage...
In stock
7 days
WCMB001
Mega max bond has been developed specifically for sealing dynamically moving joints such as expansion and control joints. For water proofing and masonry joints. Therefoe may be used to bond and seal most common building material including concrete glass wood stone metal and anodized aluminium In the expansion joints the concrete structure As joint selant between heavy and light prefabricated concrete element As a joint sealent in metal structure in clading in door and window frames (metal wood aluminium PVC) As a sealent for cracks  As a sealent for glass blocks For bonding backed clay...
In stock
7 days
WCMSB004
MEGA SHEILD is a protective and decorative heat proof coating, which is specially formulated for brushable application over any surfaces to resist and reflect ultraviolet (Sunrays) to insulate any structure. MEGA SHEILD is designed as a high economical solution which easy to apply at any surface. Form Liquid Appearance/Color Appearance/Color Chemical base Approximately 70% ± 10% Initial setting 3-5 hours Final curing time 1-3 days (depending on ambient temperature/thickness Packing  5 kg bucket Coverage...
In stock
7 days
WCMF003
Mega flex is used for: Non-exposed applications, covered, tiled or topped including: • Foundations. • Basements. • Retaining walls. • Roofs slabs. • Balconies and terraces. • Decks and patios. • Wet areas such as bathrooms, kitchens toilets, As a protective coat; • On shear walls and all types of concrete surfaces in contact with soil against moisture. g time Form liquid Appearance/Color dark brownish to black (when dry Chemical Base Rubberized Bitumen Emulsion Unit weight 1.05 ± 0.01kg/lt (@ 20° C Flash point...
In stock
7 days
WCBL003
Color Black Consistency Visco-Elastic Compound Pouring Temperatures 180-200 Penetra on at 25 C (77 F) 150 gms, 4 sec (1/110 mm) < 90 Bonding Excellent Flow at 140 F (max) 5 mm Packing  20kg Excellent and permanent sealing to the concrete and pavement Joints. Does not flow from the joints or be picked up by vehicles tires at summer temperature. Suitable for completely filling the joints without the inclusion of large air holes or discontinuities and does not cause damage to the material. Capable...
In stock
7 days
Weight: 1.000 Kg.
6306045 SET 50 G + 200 ML
Brand: BISON
Firmly bonds in 10 seconds Ideal for difficult connections For many materials Transparent  
Brand: BISON
In stock
7 days
MPAF001
Excellent initial flow and flow retention. High early and ultimate strength facilitates rapid installation and durability of the hardened grout respectively. Dual expansion in plastic and hardened phases. Impermeable and resistant to oil and water. Suitable for pumping or pouring over a large range of application consistencies and temperatures. Suitable for grouting and anchoring of UPVC pipes service penetration. USES Used for free flow precision grouting, bedding and void filling applications. Used in a wide range of heavy duty applications such as Bridge bearings...
In stock
7 days
WCLS001
Reduces cracking through increased mortar flexural strength • Increases wear resistance under rubber wheeled traffic • Improves bond strengths to hardened concrete • Increases durability during freeze/thaw cycles • Increases mortar tensile strength USES Mega latex SBR is used for: SBR Liquid is suitable for both internal and external use. Concrete repairs Floor toppings Bonding of screed & renders Waterproofing of roof, tanks,pools etc
In stock
7 days
WCMP001
Mega Metal Pro coating also perfect to steel surafce due to its versatile nature polyurethane steel coating can applied effortelessly and offer the same  durabality and UV resistanance when you aply the polyuthrane coating to  steel equipment its proctect to the UV rays high pressure wash down etc mega metal pro is perfect to structure steel and also and usedfor the maintenance of auto parts and trucks etc. Tanks exterior of steel and iron pipes Offshore structure marine veeselsFPSO vessele linings under immersed conditions up to 55c Concrete structure Flow lines risers jettys water storage tanks...
In stock
7 days
CCMP002
Durable: Chloride-free, will not promote corrosion of reinforcement. Expands as it sets to ensure a permanent watertight seal. Mechanical characteristic similar to concrete. Cost effective: Ultra-rapid setting for instant leak plugging. Block water, no injection equipment required. Easy to apply: Only to be mixed with water. Environmentally Friendly: Cement based, contain no toxic elements. • Stops active water or seepage under pressure through joints, cracks and holes in concrete or masonry, where a normal mortar would be washed away and resin would not bond. • For sealing cracks and...
In stock
7 days
WCCGP001
• Do not work with MEGA WATER SEAL Two component acrylic cementitious coating when substrate temperatures are below +5°C and above +40°C, or in conditions where heat or wind may have a strong effect. • Substrates treated with water-repellent waterproofing agents or evaporation protec tion must be pretreated. • Only mix a quantity of MEGA WATER SEAL Two component acrylic cementitious coating that can be used within an hour. • On large areas apply the slurry in sections. Any further work must be carried out wet on wet. • The bonding agent must be applied to cover the whole area completely,...
In stock
7 days
WCMP003
Mega prime is used for: • Tanking and waterproofing of substructures to provide an impervious membrane in wet areas • Damp proof membrane for roof • Floor slabs • Basements, retaining walls • Landscape deck • Curing membrane Chemical base Bitumen Emulsion Density (at 23˚C) 1.00kg/lt Flash Point Non-flammable Solid Content Approximately 26 % by Curing Time Touch dry after Approx 2 hours Over coatable after Approx. 8 hours Fully cured after Approx. 72 hours Consumptions On Concrete...