Tapes, Adhesives & Sealants

In stock
7 days
WCWSP002
• Used for interior and exterior waterproofing of cement supports and masonry against humidity and cellar waters, against stagnant waters etc. • It can be used above or below grade, to waterproof cisterns, tunnels, reservoirs, basements, retaining walls. • Waterproofing positive pressure like swimming pools purification plants plinths, dams etc. • Waterproofing negative pressure like galleries, humid rooms, elevator shafts etc. Appearance Fine grey powder Water Absorption 3.6% water (boiling)  submersion at 24 hours Color Reddish Brown (after apply)...
In stock
7 days
WCWSP001
• Used for interior and exterior waterproofing of cement supports and masonry against humidity and cellar waters, against stagnant waters etc. • It can be used above or below grade, to waterproof cisterns, tunnels, reservoirs, basements, retaining walls. • Waterproofing positive pressure like swimming pools purification plants plinths, dams etc. • Waterproofing negative pressure like galleries, humid rooms, elevator shafts etc. Appearance Fine grey powder Water Absorption 3.6% water (boiling)  submersion at 24 hours Color Reddish Brown (after apply)...
In stock
7 days
WCMP001
Mega prime is used for: • Tanking and waterproofing of substructures to provide an impervious membrane in wet areas • Damp proof membrane for roof • Floor slabs • Basements, retaining walls • Landscape deck • Curing membrane Chemical base Bitumen Emulsion Density (at 23˚C) 1.00kg/lt Flash Point Non-flammable Solid Content Approximately 26 % by Curing Time Touch dry after Approx 2 hours Over coatable after Approx. 8 hours Fully cured after Approx. 72 hours Consumptions On Concrete...
In stock
7 days
WCMF001
Mega flex is used for: Non-exposed applications, covered, tiled or topped including: • Foundations. • Basements. • Retaining walls. • Roofs slabs. • Balconies and terraces. • Decks and patios. • Wet areas such as bathrooms, kitchens toilets, As a protective coat; • On shear walls and all types of concrete surfaces in contact with soil against moisture. g time Form liquid Appearance/Color dark brownish to black (when dry Chemical Base Rubberized Bitumen Emulsion Unit weight 1.05 ± 0.01kg/lt (@ 20° C Flash point...
In stock
7 days
WCWL002
Mega water Loc is a dry powder that when mixed with water to a creamy consistency can be applied as a brush on slurry to concrete as a penetrating surface treatment. Supply Form Powder Color Gray Bulk Density 2.0Kg Application Temp >5c Setting Time 2-4 hours Bonding Strength 1.25 Mpa Packing 5 kg Coverage 36-40 sft
In stock
7 days
WCWS001
Do not work with MEGA WATER SEAL Two component acrylic cementitious coating when substrate temperatures are below +5°C and above +40°C, or in conditions where heat or wind may have a strong effect. • Substrates treated with water-repellent waterproofing agents or evaporation protec tion must be pretreated. • Only mix a quantity of MEGA WATER SEAL Two component acrylic cementitious coating that can be used within an hour. • On large areas apply the slurry in sections. Any further work must be carried out wet on wet. • The bonding agent must be applied to cover the whole area completely,...
In stock
7 days
WCMF002
Mega flex is used for: Non-exposed applications, covered, tiled or topped including: • Foundations. • Basements. • Retaining walls. • Roofs slabs. • Balconies and terraces. • Decks and patios. • Wet areas such as bathrooms, kitchens toilets, As a protective coat; • On shear walls and all types of concrete surfaces in contact with soil against moisture. g time Form liquid Appearance/Color dark brownish to black (when dry Chemical Base Rubberized Bitumen Emulsion Unit weight 1.05 ± 0.01kg/lt (@ 20° C Flash point...
In stock
7 days
WCMG001
Excellent initial flow and flow retention. High early and ultimate strength facilitates rapid installation and durability of the hardened grout respectively. Dual expansion in plastic and hardened phases. Impermeable and resistant to oil and water. Suitable for pumping or pouring over a large range of application consistencies and temperatures. Suitable for grouting and anchoring of UPVC pipes service penetration. USES Used for free flow precision grouting, bedding and void filling applications. Used in a wide range of heavy duty applications such as Bridge bearings foundation, Crane...
In stock
7 days
WCWS002
Do not work with MEGA WATER SEAL Two component acrylic cementitious coating when substrate temperatures are below +5°C and above +40°C, or in conditions where heat or wind may have a strong effect. • Substrates treated with water-repellent waterproofing agents or evaporation protec tion must be pretreated. • Only mix a quantity of MEGA WATER SEAL Two component acrylic cementitious coating that can be used within an hour. • On large areas apply the slurry in sections. Any further work must be carried out wet on wet. • The bonding agent must be applied to cover the whole area completely,...
In stock
7 days
WCWL001
Mega water Loc is a dry powder that when mixed with water to a creamy consistency can be applied as a brush on slurry to concrete as a penetrating surface treatment. Supply Form Powder Color Gray Bulk Density 2.0Kg Application Temp >5c Setting Time 2-4 hours Bonding Strength 1.25 Mpa Packing 25 kg Coverage 180-200 sft
In stock
7 days
WCMP002
Mega prime is used for: • Tanking and waterproofing of substructures to provide an impervious membrane in wet areas • Damp proof membrane for roof • Floor slabs • Basements, retaining walls • Landscape deck • Curing membrane Chemical base Bitumen Emulsion Density (at 23˚C) 1.00kg/lt Flash Point Non-flammable Solid Content Approximately 26 % by Curing Time Touch dry after Approx 2 hours Over coatable after Approx. 8 hours Fully cured after Approx. 72 hours Consumptions On Concrete...
In stock
7 days
WCAM001
✓ The special coaty system gives outstanding water and dirt resistance. ✓ Excellent UV protection and moisture control. ✓ Rapid Drying - fast recoating time and labour saving. ✓ Outstanding exterior durability flexibility and adhesion. ✓ Lock porosity of the substrate and create anti-porus surface to prevent moisture penetration. ✓ Can be used on EIFS, XPS & EPS system.     Appearance Mid-sheen Colour White, Beige, Light Green, Light Pink Light Purple, Light Blue, Light orange and as per customization. Binder Polyurethane Density at 23°C...
In stock
7 days
WCMG001
Excellent initial flow and flow retention. High early and ultimate strength facilitates rapid installation and durability of the hardened grout respectively. Dual expansion in plastic and hardened phases. Impermeable and resistant to oil and water. Suitable for pumping or pouring over a large range of application consistencies and temperatures. Suitable for grouting and anchoring of UPVC pipes service penetration. USES Used for free flow precision grouting, bedding and void filling applications. Used in a wide range of heavy duty applications such as Bridge bearings foundation, Crane...
In stock
7 days
MPAF002
Excellent initial flow and flow retention. High early and ultimate strength facilitates rapid installation and durability of the hardened grout respectively. Dual expansion in plastic and hardened phases. Impermeable and resistant to oil and water. Suitable for pumping or pouring over a large range of application consistencies and temperatures. Suitable for grouting and anchoring of UPVC pipes service penetration. USES Used for free flow precision grouting, bedding and void filling applications. Used in a wide range of heavy duty applications such as Bridge bearings...
In stock
7 days
WCMSB001
MEGA SHEILD is a protective and decorative heat proof coating, which is specially formulated for brushable application over any surfaces to resist and reflect ultraviolet (Sunrays) to insulate any structure. MEGA SHEILD is designed as a high economical solution which easy to apply at any surface. Form Liquid Appearance/Color Appearance/Color Chemical base Approximately 70% ± 10% Initial setting 3-5 hours Final curing time 1-3 days (depending on ambient temperature/thickness Packing  20kg bucket Coverage...
In stock
7 days
WCMSB004
MEGA SHEILD is a protective and decorative heat proof coating, which is specially formulated for brushable application over any surfaces to resist and reflect ultraviolet (Sunrays) to insulate any structure. MEGA SHEILD is designed as a high economical solution which easy to apply at any surface. Form Liquid Appearance/Color Appearance/Color Chemical base Approximately 70% ± 10% Initial setting 3-5 hours Final curing time 1-3 days (depending on ambient temperature/thickness Packing  5 kg bucket Coverage...
In stock
7 days
WCMB001
Mega max bond has been developed specifically for sealing dynamically moving joints such as expansion and control joints. For water proofing and masonry joints. Therefoe may be used to bond and seal most common building material including concrete glass wood stone metal and anodized aluminium In the expansion joints the concrete structure As joint selant between heavy and light prefabricated concrete element As a joint sealent in metal structure in clading in door and window frames (metal wood aluminium PVC) As a sealent for cracks  As a sealent for glass blocks For bonding backed clay...
In stock
7 days
WCBL003
Color Black Consistency Visco-Elastic Compound Pouring Temperatures 180-200 Penetra on at 25 C (77 F) 150 gms, 4 sec (1/110 mm) < 90 Bonding Excellent Flow at 140 F (max) 5 mm Packing  20kg Excellent and permanent sealing to the concrete and pavement Joints. Does not flow from the joints or be picked up by vehicles tires at summer temperature. Suitable for completely filling the joints without the inclusion of large air holes or discontinuities and does not cause damage to the material. Capable...
In stock
7 days
WCMF003
Mega flex is used for: Non-exposed applications, covered, tiled or topped including: • Foundations. • Basements. • Retaining walls. • Roofs slabs. • Balconies and terraces. • Decks and patios. • Wet areas such as bathrooms, kitchens toilets, As a protective coat; • On shear walls and all types of concrete surfaces in contact with soil against moisture. g time Form liquid Appearance/Color dark brownish to black (when dry Chemical Base Rubberized Bitumen Emulsion Unit weight 1.05 ± 0.01kg/lt (@ 20° C Flash point...
In stock
7 days
WCLS001
Reduces cracking through increased mortar flexural strength • Increases wear resistance under rubber wheeled traffic • Improves bond strengths to hardened concrete • Increases durability during freeze/thaw cycles • Increases mortar tensile strength USES Mega latex SBR is used for: SBR Liquid is suitable for both internal and external use. Concrete repairs Floor toppings Bonding of screed & renders Waterproofing of roof, tanks,pools etc
In stock
7 days
WCMP001
Mega Metal Pro coating also perfect to steel surafce due to its versatile nature polyurethane steel coating can applied effortelessly and offer the same  durabality and UV resistanance when you aply the polyuthrane coating to  steel equipment its proctect to the UV rays high pressure wash down etc mega metal pro is perfect to structure steel and also and usedfor the maintenance of auto parts and trucks etc. Tanks exterior of steel and iron pipes Offshore structure marine veeselsFPSO vessele linings under immersed conditions up to 55c Concrete structure Flow lines risers jettys water storage tanks...
In stock
7 days
MPAF001
Excellent initial flow and flow retention. High early and ultimate strength facilitates rapid installation and durability of the hardened grout respectively. Dual expansion in plastic and hardened phases. Impermeable and resistant to oil and water. Suitable for pumping or pouring over a large range of application consistencies and temperatures. Suitable for grouting and anchoring of UPVC pipes service penetration. USES Used for free flow precision grouting, bedding and void filling applications. Used in a wide range of heavy duty applications such as Bridge bearings...
In stock
7 days
WCMP003
Mega prime is used for: • Tanking and waterproofing of substructures to provide an impervious membrane in wet areas • Damp proof membrane for roof • Floor slabs • Basements, retaining walls • Landscape deck • Curing membrane Chemical base Bitumen Emulsion Density (at 23˚C) 1.00kg/lt Flash Point Non-flammable Solid Content Approximately 26 % by Curing Time Touch dry after Approx 2 hours Over coatable after Approx. 8 hours Fully cured after Approx. 72 hours Consumptions On Concrete...
In stock
7 days
CCMP002
Durable: Chloride-free, will not promote corrosion of reinforcement. Expands as it sets to ensure a permanent watertight seal. Mechanical characteristic similar to concrete. Cost effective: Ultra-rapid setting for instant leak plugging. Block water, no injection equipment required. Easy to apply: Only to be mixed with water. Environmentally Friendly: Cement based, contain no toxic elements. • Stops active water or seepage under pressure through joints, cracks and holes in concrete or masonry, where a normal mortar would be washed away and resin would not bond. • For sealing cracks and...
In stock
7 days
WCCGP001
• Do not work with MEGA WATER SEAL Two component acrylic cementitious coating when substrate temperatures are below +5°C and above +40°C, or in conditions where heat or wind may have a strong effect. • Substrates treated with water-repellent waterproofing agents or evaporation protec tion must be pretreated. • Only mix a quantity of MEGA WATER SEAL Two component acrylic cementitious coating that can be used within an hour. • On large areas apply the slurry in sections. Any further work must be carried out wet on wet. • The bonding agent must be applied to cover the whole area completely,...
In stock
7 days
CCMP001
Durable: Chloride-free, will not promote corrosion of reinforcement. Expands as it sets to ensure a permanent watertight seal. Mechanical characteristic similar to concrete. Cost effective: Ultra-rapid setting for instant leak plugging. Block water, no injection equipment required. Easy to apply: Only to be mixed with water. Environmentally Friendly: Cement based, contain no toxic elements. • Stops active water or seepage under pressure through joints, cracks and holes in concrete or masonry, where a normal mortar would be washed away and resin would not bond. • For sealing cracks and...
In stock
7 days
WCRG001
Mega Rubber Gum is a polyuthrane resinbased moisture-curing adhesive it is use produced using technology developed in MAPEI own labortaries and has the following chracterstics One component readyb to use product no hardener is required there fore no premilinery mixed its store correctly remaing quantites of the product ready to use again at the later date. Easy to appply even the low tempreatures Very limited expansion of the prioduct therefore no faltness problem afyer laying It does not contain solvenr or other substance which give off unpleasant smell Preapartion if the sub-base to sythatic playing...
In stock
7 days
WCRG004
Mega Rubber Gum is a polyuthrane resinbased moisture-curing adhesive it is use produced using technology developed in MAPEI own labortaries and has the following chracterstics One component readyb to use product no hardener is required there fore no premilinery mixed its store correctly remaing quantites of the product ready to use again at the later date. Easy to appply even the low tempreatures Very limited expansion of the prioduct therefore no faltness problem afyer laying It does not contain solvenr or other substance which give off unpleasant smell Preapartion if the sub-base to sythatic playing...
In stock
7 days
CCMCC9003
Durable: Chloride-free, will not promote corrosion of reinforcement. Expands as it sets to ensure a permanent watertight seal. Mechanical characteristic similar to concrete. Cost effective: Ultra-rapid setting for instant leak plugging. Block water, no injection equipment required. Easy to apply: Only to be mixed with water. Environmentally Friendly: Cement based, contain no toxic elements. Advantages Stops running water; develops high-strength quickly • Sets above or below water • Expands to lock in place • Mixes easily with water only • Minimizes downtime • Maintains volume stability...
In stock
7 days
WCMB002
Flexible joint sealent  Stability at high ambient temperature Excellent adhesion strong durable bond single component USES Bitu Mastic is ideally suited foe sealing filling gaps jonts of roofs and rigid pavements.Sealing around roof/wet services pipes.Pointing between brickwork and roof flashing.Selaing cracks in asphalt for concrete for pavemens.Filling horizontal joints in concrete and and asphalt where movements are not expected.
In stock
7 days
WCMB001
Flexible joint sealent  Stability at high ambient temperature Excellent adhesion strong durable bond single component USES Bitu Mastic is ideally suited foe sealing filling gaps jonts of roofs and rigid pavements.Sealing around roof/wet services pipes.Pointing between brickwork and roof flashing.Selaing cracks in asphalt for concrete for pavemens.Filling horizontal joints in concrete and and asphalt where movements are not expected.
In stock
7 days
WCWGB001
In abov ground exterior walls exposed to rain and standing water yield of mega water gaurad single component polyurethane based elasmating coating. Apply coat of mega water guard 1.00 kg /1.20sqm-1.60sqm yielsd of the mixed product will be the depend on the texture and prosoity of the surafce for application of he treads of the joints its is recommonded to towel the area beforehand. Specific gravity 1.6+/- 0.05 Tear Resistance  >15N Shore Hardness A 70 Elogantion At Break  >600 QUV Acclerated Weathering Test Passed 2000 hours Solar...
In stock
7 days
CCMCC9001
Durable: Chloride-free, will not promote corrosion of reinforcement. Expands as it sets to ensure a permanent watertight seal. Mechanical characteristic similar to concrete. Cost effective: Ultra-rapid setting for instant leak plugging. Block water, no injection equipment required. Easy to apply: Only to be mixed with water. Environmentally Friendly: Cement based, contain no toxic elements. Advantages Stops running water; develops high-strength quickly • Sets above or below water • Expands to lock in place • Mixes easily with water only • Minimizes downtime • Maintains volume stability...
In stock
7 days
CCMCC9002
Durable: Chloride-free, will not promote corrosion of reinforcement. Expands as it sets to ensure a permanent watertight seal. Mechanical characteristic similar to concrete. Cost effective: Ultra-rapid setting for instant leak plugging. Block water, no injection equipment required. Easy to apply: Only to be mixed with water. Environmentally Friendly: Cement based, contain no toxic elements. Advantages Stops running water; develops high-strength quickly • Sets above or below water • Expands to lock in place • Mixes easily with water only • Minimizes downtime • Maintains volume stability...
In stock
7 days
WCRG002
Mega Rubber Gum is a polyuthrane resinbased moisture-curing adhesive it is use produced using technology developed in MAPEI own labortaries and has the following chracterstics One component readyb to use product no hardener is required there fore no premilinery mixed its store correctly remaing quantites of the product ready to use again at the later date. Easy to appply even the low tempreatures Very limited expansion of the prioduct therefore no faltness problem afyer laying It does not contain solvenr or other substance which give off unpleasant smell Preapartion if the sub-base to sythatic playing...
In stock
7 days
WCAM002
✓ The special coaty system gives outstanding water and dirt resistance. ✓ Excellent UV protection and moisture control. ✓ Rapid Drying - fast recoating time and labour saving. ✓ Outstanding exterior durability flexibility and adhesion. ✓ Lock porosity of the substrate and create anti-porus surface to prevent moisture penetration. ✓ Can be used on EIFS, XPS & EPS system.     Appearance Mid-sheen Colour White, Beige, Light Green, Light Pink Light Purple, Light Blue, Light orange and as per customization. Binder Polyurethane Density at 23°C...
In stock
7 days
WCMP004
Mega Metal Pro coating also perfect to steel surafce due to its versatile nature polyurethane steel coating can applied effortelessly and offer the same  durabality and UV resistanance when you aply the polyuthrane coating to  steel equipment its proctect to the UV rays high pressure wash down etc mega metal pro is perfect to structure steel and also and usedfor the maintenance of auto parts and trucks etc. Tanks exterior of steel and iron pipes Offshore structure marine veeselsFPSO vessele linings under immersed conditions up to 55c Concrete structure Flow lines risers jettys water storage tanks...
In stock
7 days
CCMP003
Durable: Chloride-free, will not promote corrosion of reinforcement. Expands as it sets to ensure a permanent watertight seal. Mechanical characteristic similar to concrete. Cost effective: Ultra-rapid setting for instant leak plugging. Block water, no injection equipment required. Easy to apply: Only to be mixed with water. Environmentally Friendly: Cement based, contain no toxic elements. • Stops active water or seepage under pressure through joints, cracks and holes in concrete or masonry, where a normal mortar would be washed away and resin would not bond. • For sealing cracks and...
In stock
7 days
WCWGB002
In abov ground exterior walls exposed to rain and standing water yield of mega water gaurad single component polyurethane based elasmating coating. Apply coat of mega water guard 1.00 kg /1.20sqm-1.60sqm yielsd of the mixed product will be the depend on the texture and prosoity of the surafce for application of he treads of the joints its is recommonded to towel the area beforehand. Specific gravity 1.6+/- 0.05 Tear Resistance  >15N Shore Hardness A 70 Elogantion At Break  >600 QUV Acclerated Weathering Test Passed 2000 hours Solar...
In stock
7 days
SPSB001
Easy jont and application methods Slow expansion rate during curing to aviod damaging recently placed coccrete Maintain its original from even after repeated contraction  Active protection when i contact with water Mega Swell 650 hydophollic watershop expands to provide strong compression joint Long term wet/dry cycling has little effect on the sewwlling properties  Maintain and effective seal in wet conditions. Color Blue Black Red Service Temperature Range  -30 to 70c Shore A Hardness 40-50 Expansion Volume fresh Water >200%...
In stock
7 days
WCRG003
Mega Rubber Gum is a polyuthrane resinbased moisture-curing adhesive it is use produced using technology developed in MAPEI own labortaries and has the following chracterstics One component readyb to use product no hardener is required there fore no premilinery mixed its store correctly remaing quantites of the product ready to use again at the later date. Easy to appply even the low tempreatures Very limited expansion of the prioduct therefore no faltness problem afyer laying It does not contain solvenr or other substance which give off unpleasant smell Preapartion if the sub-base to sythatic playing...
In stock
7 days
WCMSB005
MEGA SHEILD is a protective and decorative heat proof coating, which is specially formulated for brushable application over any surfaces to resist and reflect ultraviolet (Sunrays) to insulate any structure. MEGA SHEILD is designed as a high economical solution which easy to apply at any surface. Form Liquid Appearance/Color Appearance/Color Chemical base Approximately 70% ± 10% Initial setting 3-5 hours Final curing time 1-3 days (depending on ambient temperature/thickness Packing 800g bucket Coverage...
In stock
7 days
WCWGB003
In abov ground exterior walls exposed to rain and standing water yield of mega water gaurad single component polyurethane based elasmating coating. Apply coat of mega water guard 1.00 kg /1.20sqm-1.60sqm yielsd of the mixed product will be the depend on the texture and prosoity of the surafce for application of he treads of the joints its is recommonded to towel the area beforehand. Specific gravity 1.6+/- 0.05 Tear Resistance  >15N Shore Hardness A 70 Elogantion At Break  >600 QUV Acclerated Weathering Test Passed 2000 hours Solar...