Adhesives & Glues

In stock
7 days
Weight: 0.425 Kg.
6312093
Brand: BISON
Super-fast building of final bonding strength Very high final bond strength Permanently elastic Can be used internally and externally Paintable (test first) Good filling capacity Resistant to temperatures between -40 °C and +100 °C UV, water and all-weatherresistant 100 % adhesive (non-shrinking) Also bonds to slightly damp surfaces Solvent-free Excellent bonding without primer Acid-free, odourless
Brand: BISON
In stock
7 days
Weight: 350.000 Kg.
6311118
Brand: BISON
Very high final bond strength Easy to apply Filling Particularly for interiors Solvent-free Permanently elastic Universally applicable Suitable for uneven surfaces Correctable Moisture resistant Temperature resistant
Brand: BISON
In stock
7 days
Weight: 0.500 Kg.
1492345
Brand: BISON
Powerful effect Quick-drying
Brand: BISON
In stock
7 days
Weight: 0.650 Kg.
6300577 TIN 650 ML
Brand: BISON
Bonds immediately Super-strong Suitable for materials under stress Universal Liquid Moisture and frost resistant Simple to use Resistant to temperatures between -40 °C and +70 °C
Brand: BISON
In stock
7 days
Weight: 0.200 Kg.
6306045 SET 50 G + 200 ML
Brand: BISON
Firmly bonds in 10 seconds Ideal for difficult connections For many materials Transparent  
Brand: BISON
In stock
7 days
Weight: 0.425 Kg.
6316011 440G WHITE
Brand: BISON
Very high initial bond strength Super-fast building of final bonding strength Very high final bond strength Permanently elastic Can be used internally and externally Paintable (test first) Good filling capacity Resistant to temperatures between -40 °C and +100 °C UV, water and all-weatherresistant 100 % adhesive (non-shrinking) Also bonds to slightly damp surfaces Solvent-free Excellent bonding without primer Acid-free, odourless
Brand: BISON
In stock
7 days
Weight: 0.500 Kg.
6307693
Brand: BISON
Does not run Durable quality Robust inside 360° rotatable
Brand: BISON
In stock
7 days
Weight: 0.750 Kg.
6313129 750ML
Brand: BISON
For sealing, protecting and repairing 100 % waterproof Permanently elastic 750 % Easy to apply (by brush) Bonds to almost all materials. Protection against corrosion and erosion All-weather and UV resistant Salt and chemical resistant Paintable (test first) Durable quality: durability of minimum 20 years (tested conform EN 1297) Waterbased, solvent-free, VOC-free, non-toxica
Brand: BISON
In stock
7 days
Weight: 0.300 Kg.
6308546 300 G TRANSPARENT
Brand: BISON
Crystal clear Very high final bond strength Super-fast building of final bonding strength Permanently elastic Can be used internally and externally Paintable (test first) Good filling capacity Resistant to temperatures between -40 °C and +100 °C Water and all-weatherproof 100 % adhesive (non-shrinking) Also bonds to slightly damp surfaces Solvent-free Excellent bonding without primer Acid-free, odourless
Brand: BISON
In stock
7 days
Weight: 0.440 Kg.
6311118 440 G
Very high final bond strength Easy to apply Filling Particularly for interiors Solvent-free Permanently elastic Universally applicable Suitable for uneven surfaces Correctable Moisture resistant Temperature resistant
In stock
7 days
Weight: 0.500 Kg.
HSGU3122
Brand: INGCO
Material:100% purity glue Hardening time:10 seconds Net weight:3g One year guarantee 3 parts big cap Color:Clear Application:Plastics,leather,metal,ceramic and wood. 12Pcs/Set Packed by blister card
Brand: INGCO
In stock
7 days
ORALITH ½ Kg POUCH
Brand: AQP
ORALITH ½ Kg POUCH GERMEN WHITE GLUE
Brand: AQP
In stock
7 days
25909
Brand: PERMATEX
Easy-to-use filler forms along-lasting, metal-tough bond. Repairs cracks or porosity leaks in case metal parts. Can be drilled, filed, sanded and painted. Works on metal, wood, and concrete. Excellent adhesion to galvanized metal.
Brand: PERMATEX
In stock
7 days
EXTREME LITH (486) 1 Kg_1E00
Brand: AQP
EXTREME LITH (486) 1 Kg POUCH Water Proof
Brand: AQP
Rs.5,28000
20 pcs (Rs.26400 per pcs)
In stock
7 days
orient 270 1/2 kg_86B5
Versatile Crafting Solution Quick-Drying Formula Precision Applicator Reliable Adhesion Non-Toxic and Safe Craftsmanship Made Easy
Rs.6,16000
20 pcs (Rs.30800 per pcs)
In stock
7 days
EXTREME LITH (486) ½ Kg
Brand: AQP
EXTREME LITH (486) ½ Kg POUCH Water Proof
Brand: AQP
Rs.3,96000
30 pcs (Rs.13200 per pcs)
In stock
7 days
orient 270 1/2 kg
Versatile Crafting Solution Quick-Drying Formula Precision Applicator Reliable Adhesion Non-Toxic and Safe Craftsmanship Made Easy
Rs.4,78500
30 pcs (Rs.15950 per pcs)
In stock
7 days
ORIENT 540 1 Kg POUCH
Brand: AQP
AL QASWA POLYMERS ORIENT 540 1 Kg POUCH SPECIAL FOR PVC EDGE BANDING AND FARMICA
Brand: AQP
Rs.8,36000
20 pcs (Rs.41800 per pcs)
In stock
7 days
ORALITH 1 Kg POUCH_D6D8
Brand: AQP
ORALITH 1 Kg POUCH GERMEN WHITE GLUE
Brand: AQP
Rs.3,85000
20 pcs (Rs.19250 per pcs)
In stock
7 days
33 medium
Brand: MOLYKOTE
MOLYKOTE™ 33 Medium- Extreme Low Temperature Bearing Grease Off-White is a thickened silicone oil that is used for lubricating plastics, rubber, and antifriction bearings. It is recommended for meters, plastic clock motors, freezer cart castors, low-torque instruments, and conveyor equipment. It provides good shear stability, wide service temperature range, inertness, and resistance to corrosion, moisture, and oxidation.
Brand: MOLYKOTE
In stock
7 days
LTRA SOLID FIX 800 Gm
Brand: AQP
AL QASWA POLYMERS ULTRA SOLID FIX 800 Gm BUCKETS
Brand: AQP
Rs.10,42800
12 pcs (Rs.86900 per pcs)
In stock
7 days
TOP GLUE 16 Kg JAR
Brand: AQP
AL QASWA POLYMERS TOP GLUE 16 Kg JAR
Brand: AQP
In stock
7 days
81730
Brand: PERMATEX
Forms a tough, waterproof, durable, clear seal Resistant to weather, extreme temperatures, vibration, shock and most shop chemicals Flows into hidden and hard-to-reach areas to seal leaks Fills surface voids and irregularities Temperature Range: -80°F to 400°F (-62°C to 204°C)
Brand: PERMATEX
In stock
7 days
705
Brand: Akfix
High bonding strength. Suitable for use on vertical surfaces as it will not drip or slump. It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.
Brand: Akfix
In stock
7 days
Quickleen Plus
Brand: CRC
A fast-drying, powerful degreasing solvent blend free of chlorinated solvents. Penetrates and cuts through dirt, grime and contaminants to improve critical connections and enhance overall performance. Because of the increased flash point of 29°C, the risk for ignition during application is reduced. Quickly dissolves grease, oil, lubricants, tar and adhesives from all metal parts, machines and tools. Efficient wash-away of contaminants. Leaves no residue. Non-staining and non-corrosive to metals. Safe on most plastics, coatings and rubbers.
Brand: CRC
In stock
7 days
Industrial Degreaser
Brand: CRC
• Does not leave a residue.Attacks encrusted residues.Quickly penetrates and cuts through dirt. • Non corrosive. • Fast evaporation to minimize downtime. • Safe on all metal surfaces, does not stain. • Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use. • Convenient 360° (including inverted position) spray valve for aerosols. • High purity CO2 propellant, giving an active product content of 95%.
Brand: CRC
In stock
7 days
111 Compound
Brand: MOLYKOTE
MOLYKOTE™ 111 Compound is a one component, silicone oil that is used for damping, sealing, and lubricating outdoor equipment, pressure systems, electrical equipment, and used as an anti-stick. It provides low volatility, low vapor pressure, wide service temperature range, and water resistance.
Brand: MOLYKOTE
In stock
7 days
DX Paste
Brand: MOLYKOTE
Grease-paste that reduces friction in low-speed, high-load applications by delivering a combination of white solid Lubricants with a mineral oil carrier fluid to the required point of lubrication.
Brand: MOLYKOTE
In stock
7 days
4 Electrical Insulating Compound
Brand: MOLYKOTE
Molykote 4 Electrical Insulating Compound is a translucent white grease-like silicone that is used to make moisture resistant seals for electrical, automotive, aircraft, and marine assemblies. It can also be used to lubricate and seal o-rings, switches, door seals, cable connectors, and battery terminals. It is odorless, has high dielectric strength, good chemical stability and thermal oxidation.
Brand: MOLYKOTE
In stock
7 days
D-321 R Anti-Friction Coating
Brand: MOLYKOTE
Dow MOLYKOTE™ D 321 R Anti-friction Coating Gray-Black is an air-curing, solid, dry lubricant that is used for metal to metal applications that have high loads and slow to medium fast movements. It can also be used to improve the running-in process, permanently lubricating stressed sliding guides, or on high voltage switches. It provides resistance against ageing and stick-slips.
Brand: MOLYKOTE
In stock
7 days
Long term 2 Plus Grease
Brand: MOLYKOTE
MOLYKOTE™ Long-term 2 plus High Performance Grease Black is a solid lubricant with mineral oil that is used for metal to metal applications with high loads and slow to medium-fast movements. It is recommended for clutches, spline profiles, and bearings in the automotive industry. It provides long term lubrication, high load carrying capacity, and protection against corrosion and wear.
Brand: MOLYKOTE
In stock
7 days
100E
Brand: Akfix
100E is an one-component acetoxy cure silicone sealant for a range of general sealing and glazing applications. It  provides  a  strong  adhesion  and  suitable  for  use  on  common  non-porous  building materials.
Brand: Akfix
In stock
7 days
AS606
Brand: Akfix
AS606 is one-component acrylic emulsion based sealant reinforced with silicone emulsion. It has superior adhesion and good elasticity. Its siliconized structure, makes it possible to handle movement up to 15% Water based & Non-toxic. Very low VOC content. Water-proof after curing. Over paintable. Very easy to apply and clean. Can be used on all porous surfaces such as brick, concrete, wood etc. No odour.
Brand: Akfix
In stock
7 days
Belt Grip FPS Perma Lock
Brand: CRC
Water resistant. Aids transmission efficiency and gives extra pulling power. Stops slipping and squeaking. Designed for use in food processing areas where incidental food contact may occur. Prevents slip on all kinds of belts, except toothed belts. CRC Belt Grip increases the transmission of power between belts and pulley. Gives an improved traction and allows running in at reduced belt tension
Brand: CRC
In stock
7 days
P635
Brand: Akfix
Construction PU Sealant is a one-component, low-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics. Possesses permanent elasticity. 25 % movement capability. No surface tackiness after full cure. Do not pick up dirt. No shrinkage. Cures bubble-free. Enhanced storage stability. No sagging – Thixotropic. Can be applied with hand gun and tooled easily. Paintable.
Brand: Akfix
In stock
7 days
7 Release Compound
Brand: MOLYKOTE
MOLYKOTE™ 7 Release Compound Clear White is a grease-like, dimethyl silicone compound that is used as a lubricant, preservative, and a release agent for mold, adhesives, rubber, metals, processing equipment, and plastic extruders. It offers versatility, heat stability, safe for food contact, and resistance to moisture and oxidation.
Brand: MOLYKOTE
In stock
7 days
Br2 Plus High Performance Grease
Brand: MOLYKOTE
MOLYKOTE™ BR2-Plus High Performance Grease consists of solid lubricants, mineral oil, lithium soap, and an EP additive. It is used for metal to metal applications that have medium to high loads and slow to fast movements. It is recommended for ball and socket joints, threaded spindles, sliding guides, and roller bearings. It provides protection against oxidation, scaring, corrosion, and water washout.
Brand: MOLYKOTE
In stock
7 days
Contact Cleaner
Brand: CRC
Residue-free contact cleaner for use on PCB’s and electronic equipment. Fast drying. Not for use on energized equipment. Developed for use as a cleaner for electrical or electronic equipment in food processing or non-processing areas. NSF K2.
Brand: CRC
In stock
7 days
C900
Brand: Akfix
Akfix C900 is polyester injection mortar for general purpose for solid and hollow supports having a short cure time. It is suitable for use in concrete, perforated bricks and cavity blocks in a wide range of applications. Suitable for solid and hollow structures. High solid content. Easy to extrude and to inject. Thixotropic, can be applied in vertical and horizontal direction. Fast curing.
Brand: Akfix
In stock
7 days
80 Grit
Chemico Grinding Paste has a lithium grease base, specifically formulated and manufactured solely for Chemico Sales & Overseas Ltd. The high-viscosity, high-temperature lubricant provides inherent shear stability, that is the lubricant remains in place during the grinding operation for the most efficient grinding together with inherent corrosion protection and good sealing properties. Silicon carbide is one of the hardest abrasives known and the particles are especially sharp. Moreover they are brittle and tend to break up into smaller particles that still retain their sharpness and so continue to work efficiently....
In stock
7 days
Eco Leak Finder
Brand: CRC
Water based detector for gasses. Meets the requirements of EN 14291 and DVGW (Deutsche Vereinigung des Gas- und Wasserfaches) registration number NG-5170AS0069. CRC ECO Leak Finder detects gas leaks in pressurized pipe work and pressurized systems. At the location of a gas leak, it forms highly visible bubbles. Biodegradable according to OECD 301B: 31%.
Brand: CRC
In stock
7 days
SR Multi
Brand: CRC
A general purpose release agent for all thermoplastics and many types of rubber. It is highly versatile as a release agent, ensuring accurate mould detail and improving surface finish without building up in the mould. Improves surface finish, minimizes imperfections and enhances even well-polished tool release properties Operational to +200°C Can also be used as an anti-stick agent in the textile, foam converting, printing and shoe industries Fabulous slip properties for fast demoulding Provides a smooth surface finish
Brand: CRC
In stock
7 days
Urethane Isolation
Brand: CRC
Red colored one-component, urethane type coating. Urethane coating seals out water and moisture and acts as a barrier for contaminants. The coating dries fast and adheres well to most surfaces. After curing, the protective film has a high flexibility, is durable and resists abrasion and contamination.
Brand: CRC
In stock
7 days
805
Brand: Akfix
Excellent adhesion & filling capacity and high thermal & acoustical insulation value. Excellent mounting capacity and stability. Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials. Mould-proof, water-proof, over paintable. Cured foam dries rigid and can be trimmed, shaped and sanded.
Brand: Akfix
In stock
7 days
GN Plus Paste
Brand: MOLYKOTE
MOLYKOTE® G-N Plus Paste Solid lubricant paste for the assembly and running-in of metal components.
Brand: MOLYKOTE
In stock
7 days
High Vaccum Grease
Brand: MOLYKOTE
MOLYKOTE™ High-Vacuum Grease is a one component, non-melting silicone oil that is used for sealing and lubricating O-rings, chemical processing equipment, control valves, water treating equipment, pressure systems, plug valves, and high temperature applications. It is a stiff compound with low volatility, and resists chemicals, water, mineral oils, common gases, and organic compounds
Brand: MOLYKOTE
In stock
7 days
80072
Brand: PERMATEX
Protects against moisture, road salt and corrosion Designed to offer maximum protection, coverage and durability Formula permits effective coating thickness buildup for maximum protection against corrosion Sound-proofs and insulates Won't sag or drip
Brand: PERMATEX
In stock
7 days
84109
Brand: PERMATEX
Steel reinforced, multi-metal epoxy Eliminates need for welding or brazing Resistant to water and other solvents Can be machined, sanded or drilled Ideal for bonding metal to metal and is grey in appearance Sets in 5 minutes / Cures in 10 minutes Bonds steel, stainless steel, and other metals
Brand: PERMATEX
In stock
7 days
2-26
Brand: CRC
CRC 2-26 is a multipurpose lubricant, preventing electric and electronic malfunction due to water penetration, humidity, condensation or corrosion. Displaces water, cleans, removes current leaks, lubricates and protects.
Brand: CRC
In stock
7 days
3-36 FPS
Brand: CRC
Multi purpose fluid. Displaces and seals out water and moisture. Loosens metal parts seized by dirt, corrosion or dried-up grease. Penetrates quickly. Protects metals and alloys. Lubricates without leaving a sticky residue and prevents fingerprinting on shiny metals. Safe on all metal surfaces, does not stain. Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use. Convenient 360° (including inverted position) spray valve for aerosols. High purity CO2 propellant, giving an active product content of 95%.
Brand: CRC
Adhesives and glues are liquid substances that hold materials together and prevent separation after drying. They often reinforce or provide an alternative to mechanical fasteners. Load-bearing structural adhesives are the only adhesives able to create load-bearing bonds. Construction adhesives form permanent bonds in building materials but are not intended for load-bearing applications. Spray adhesives are useful in applications that bond larger surface areas. Contact adhesives must be placed on both surfaces before joining to properly bond. Instant adhesives, also known as superglues, bond and cure the fastest among all adhesives. Hot-melt adhesives join and seal light- to medium-weight materials using hot-melt glue sticks. Wood glues bond wooden parts together, or other materials specifically to wood.